A comparison of a synthetic leather surface or a fiber starts with the specimen in front of you, not with a shared brand heading.
Testing and specifications
Four reading dimensions for Kuraray surface and fiber notes. No site-wide result is listed.
Dimension
Review question
Evidence or next step
Surface finish
Which grain, gloss or emboss belongs to this cutting?
Finish record for that construction, not a borrowed laminate assumption.
Backing and bond
What sits behind the face, and how is it joined?
Compatibility with sewing or adhesive, checked on the same build.
Fiber measure
What linear density and supply format apply to the fiber?
Unit stated as dtex or denier, package identity beside the figure.
Specimen scope
Which article, lot note and date does the page actually cover?
Stop the comparison when the next sample is a different family.
Put the method beside the result
A flex count, an abrasion endpoint or a fiber linear-density figure is readable only with its method and version. Write the conditioning too: temperature, humidity and whether a surface was tested with its backing attached. A number generated on one grain does not describe a smoother face, and a number generated on staple fiber does not describe a coated roll. If the report title and the sample label disagree, keep both labels visible and ask which one the figure follows. Kuraray, as used on this page, identifies the material conversation. It does not replace the method line.
Distinguish target and evidence
A target is what the brief hopes to achieve: a drier hand, a tighter bond, a stated denier, a usable width for a roll. Evidence is what a named specimen did under a named procedure. Keep the two in different fields. Teams sometimes paste a target into the result column because the cells look similar. That slip turns a wish into an apparent measurement. For a CLARINO-related surface, the target might be a finish and a backing behaviour. The evidence, if it exists, is a record tied to a cutting. For kuraray pva fiber, the target might be a linear density and a cut length. The evidence is a measurement on a stated package, not a photograph of a leather grain.
Treat performance dimensions separately
Surface abrasion, bond durability, colorfastness and dimensional change answer different risks. Liquid resistance and vapour movement, when a surface file mentions them, are also different and should not be collapsed into one moisture score. Fiber tenacity and surface tear strength are different again. A material that meets one priority can miss another: a tougher face can lose the hand the designer wanted, and a fiber that processes cleanly can still be the wrong linear density for the line. Choose the next sample only after each relevant dimension has its own method, its own specimen state and a note on how it relates to cutting, joining or care.
Ask for a reading that can be repeated
A note can be checked again when four items travel together: the method name and version, the specimen state, the atmosphere, and the endpoint or unit. For textiles, the atmosphere to request is commonly 20 °C and 65% relative humidity, with tolerances of about 2 °C and 4% relative humidity, as in ISO 139. Record mass in g/m², usable width in cm, composition as percent by mass adding to 100, and fiber linear density in dtex or denier. One denier is about 1.11 dtex, so leave the conversion to the source. This page does not hold a Kuraray flex count, an abrasion cycle count, a colorfastness grade on the 1 to 5 grey scale, a tear strength, or a certificate number. The repeatable path is to send the reference and ask for those fields to be read on the specimen you have. Three limits stay in force: a surface result does not describe a fiber package, a missing backing stays missing, and a bio-based phrase without its holder is not a content percentage.
Review scope before using a label
Certificates and trade phrases carry boundaries. Check the named holder, the products listed, the date and the conditions. A downloadable file elsewhere does not certify this website, and a fiber brand line does not certify a coated article. Bio-based wording attached to kuraray clarino bio-based synthetic leather has to be read on the source that uses it, including what percentage definition and which finish it covers. If that source is not in the file, leave the point open. The same restraint applies to recycled-content language and to any scheme mark. Narrow statements survive review. Broad statements that cover every surface and every fiber do not.
Use this page to prepare a question, not to supply a measured result. Write the known material reference first, then the decision that is still open. Method, specimen and scope stay attached to any figure that is already in hand. Unknown points stay questions.
Notes to keep with the page
Note
Write this
Leave this open
Material
Composition, construction and finish if known
Any value that has not been confirmed
Decision
The comparison or approval the inquiry needs
A conclusion the record does not support
Evidence
Method, specimen and scope when a report exists
A label used without that context
Next step
The sample or document that would resolve the question